Panasonic AV-HS6000

Mô tả

Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies)

• Main Frame & 2 M/E Control Panel
• Redundant Power Supply Configuration
• 32 HD-SDI and 2 DVI-D Inputs
• 16 Outputs Each Mirrored on 2 SDI Outs
• Up to 1080p 10-Bit 4:2:2 / 8-Bit 4:4:4
• Up to 1600×1200 4:3 / 1920×1200 16:10
• Selector/Crosspoint/Transition Buttons
• Downstream / Upstream Keyers
• 4-Channel MultiViewer Function
• T-Bars, Joystick, Display Panel

• AV-HS60U2P Main Frame w/ Dual Power Supply for AV-HS6000 Switcher

  SDI Input	Lines: 32 Connectors: 32 x BNC female SDI channels 27, 28, 31, and 32 are equipped with up-converters SDI channels 25 to 32 are equipped with color correctorsSignal Standards HD-SDI SMPTE292M (BTA S-004) standard compliant 0.8 V (p-p) ±10% at 75 ohm Automatic equalizer for runs more than 328′ (100 m) — when 1.5 Gbps/5C-FB cable is usedSignal Standards SD-SDI SMPTE259M standard compliant 0.8 V (p-p) ±10% at 75 ohm Automatic equalizer for runs more that 656′ (200 m) — when 5C-2V cable is used
  DVI Input	Lines: 2 Connectors: 2 x DVI-D Supported Resolutions (Computer): XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024), WSXGA+ (1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200) Vertical Frequency (Computer): 60 Hz Supported Video Formats: 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i, 720/59.94p, 720/50pNote: Cable lengths up to 16.4′ (5 m) are supported A DVI-I cables are not supported HDCP is not supported
  SDI Output	Lines: 16 — two distributed outputs per line Connectors: 32 x BNC female Assignments: ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, ME2KEYPVW, DSKPGM1, DSKPGM2, DSKPVW1, DSKPVW2, DSK1CLN, DSK2CLN, DSK3CLN, DSK4CLN, SEL KEYPVW, MV1 to MV4, and AUX1 to AUX16Signal Standards HD-SDI SMPTE292M (BTA S-004) standard compliant 0.8 V (p-p) ±10% at 75 ohmSignal Standards SD-SDI SMPTE259M standard compliant 0.8 V (p-p) ±10% at 75 ohm
  Video Formats	SD: 480/59.94i, 576/50i HD: 1080/59.94i, 1080/50i, 720/59.94p, 720/50p, 1080/24PsF, 1080/23.98PsF, 1080/25PsF
  Signal Processing	Y: PB: PR: 4:2:2, 10-bit R:G:B: 4:4:4: 8-bit
  Mix / Effect Buses	2 ME

  Synchronous Terminal
  Reference Input	Connectors: 2 x BNC female — input with loop-through Supports same field frequencies as those of the system formats supported: In Genlock Mode: Black burst or tri-level sync (with loop-through) Note: If the loop-through output is not used, 75 ohm termination is required In the 1080/24PsF and 1080/23.98PsF formats, only Genlock mode supported In the 1080/23.98PsF format, black burst signals with 10 Field ID (SMPTE318M compliant) or Tri-level Sync signals are supported In the 1080/24PsF format, Tri-level sync signals supported In internal sync mode black burst signal is output through both connectors
  LTC Input	Connector: BNC female Impedance: 1 kohm Level: 1 to 2 V (p-p)
  Video Delay	1 Line (H): When the frame synchronizer is set to “Off” and the upconverter is set to “OFF” 1 Frame (H): When the frame syncronizer is set to “ON”, or the upconverter is set to “ON”Note: When the signals have passed through PinP, DVE, MultiView, down-converter, or DVI-IN, a maximum delay of 1 frame is applied in each case

  Control Terminal
  LAN Terminal	Connector: 1 x RJ-45 Compatible with 100Base-TX and AUTO-MDIX — for IP control Supported Cable: CAT5E or better, up to 328′ (100m) — STP (Shielded Twisted Pair) cable recommended
  PANEL Terminal	Connector: RJ-45 Compatible with 100Base-TX and AUTO-MDIX — for Control Panel (AV-HS60C1/AV-HS60C2) connection Supported Cable: CAT5E or better, up to 328′ (100m) — STP (Shielded Twisted Pair) cable recommended
  Serial Interface	Connectors: 4 x D-sub 9-pin female Terminals 1 to 3: For master connection to control external devices Terminal 4: For master/slave connection to control external devices
  GPI In/Out	Connectors: 3x D-sub 25-pin female Terminal 1 GPI Input: 18 inputs, general-purpose, photocoupler sensing Alarm Output: 1 output, open collector output (negative logic) Terminal 2 and 3 GPI Output: 48 outputs, selectable general purpose or tally — open collector output

  General
  Power Requirements	100 to 240 VAC at 50 or 60 Hz
  Power Consumption	110 W
  Operating Temperature	32 to 104°F (0 to 40°C)
  Storage Temperature	32 to 104°F (0 to 40°C)
  Operating Humidity	10 to 90% RH, no condensation
  Storage Humidity	10 to 90% RH, no condensation
  Dimensions	19 x 5.2 x 16.5″ (482 x 132 x 418 mm)
  Weight	29.7 lb (13.5 kg) — excluding accessories

• Panasonic AV-HS60C2P Control Panel for AV-HS6000 (Dual Redundant Power Supply)

  Power Supply	100 – 240 VAC, 50/60 Hz (supports dual redundant power supply)
  Connections	1x RJ-45 1x DVI-D for optional Menu Panel only (cannot be used concurrently with a DVI-D monitor connected to the DVI-D terminal) 1x DVI-D for displaying menus to the DVI monitor (cannot be used concurrently with the Menu Panel terminal) 1x USB type A, female for DVI monitor menu operation 1x RS-422 control terminal, D-sub 9-pin female (for master connection for controlling external devices) 1x RS-232 control terminal, D-sub 9-pin female (for master/slave connection for controlling external devices) 8x GPI inputs D-sub 25-pin female 10x GPI outputs D-sub 25-pin female 1x Alarm output D-sub 25-pin female
  Power Consumption	40 W
  Operating Temperature	32 to 104°F (0 to 40°C)
  Storage Temperature	32 to 104°F (0 to 40°C)
  Operating Humidity	10 to 90% (no condensation)
  Storage Humidity	10 to 90% (no condensation)
  Dimensions	38.6 x 6 x 10.5″ (98 x 15.3 x 26.7 cm)
  Weight	Approx. 31 lb (13.9 kg) (excluding accessories